Banner

新闻详情

Home > news > Content

Characteristics and uses of stainless steel welded pipe

Edit:Shaanxi Tonghui Steel Co., Ltd.UpDate:2020-03-04

Stainless steel welded pipe, as the name implies, is welded pipe, just like stainless steel seamless steel pipe, but a type of steel pipe, mainly used in engineering construction departments; and stainless steel seamless steel pipe is a long bar with a hollow section and no seams around it. Steel has the characteristics of uneven wall thickness, low brightness inside and outside the tube, and high fixed-length costs. Therefore, it is mainly used for structural materials such as high strength and high pressure.

Characteristics and uses of Xi'an stainless steel welded pipe

From the perspective of production use, stainless steel welded pipes are mainly used to transport water, oil, air, and generally lower pressure fluids such as hot water or steam, and other uses. Some welded pipes can also be used for mine pressure, drainage, and shaft gas discharge. etc.

The stainless steel seamless pipe can be used in engineering and large-scale equipment to transport fluid pipelines, and can also be used in power station and nuclear power plant boilers resistant to high temperature, high pressure transmission fluid headers and pipes, etc.

During the manufacturing process of stainless steel welded pipes, rust spots will appear on the surface, and welding spatter will occur during welding. Therefore, there will be scratches on the surface of the stainless steel welded pipe in use, so how to deal with the damage of the surface of the stainless steel welded pipe? The Xi'an stainless steel welded pipe will take everyone to take a look.

ä¸ é”ˆé’¢ç„Šç®¡

Rust spots:

Rust is sometimes seen on stainless steel welded pipe products or equipment before or during production, which indicates that the surface is heavily contaminated.

The rust must be removed before the equipment is put into use, and the thoroughly cleaned surface should be inspected by iron test and / or water test.

Welding spatter:

Welding spatter has a lot to do with the welding process.

TIG (Inert Gas Shielded Tungsten Welding) has no spatter.

However, using GMAW (Gas Shielded Metal Arc Welding) and FCAW (Flux Arc Welding) welding processes can cause a lot of spatter if the welding parameters are not used properly.

When this happens, the parameters must be adjusted.

If you want to solve the problem of welding spatter, you should apply anti-spatter to each side of the joint before welding, so that the adhesion of the spatter can be eliminated.

After welding, this anti-splashing agent and various spatters can be easily cleaned off without damaging the surface or causing minor damage.

Scratches:

To prevent the accumulation of process lubricants or products and / or dirt, scratches and other rough surfaces must be mechanically cleaned.

The manufacturing process of Xi'an stainless steel welded pipe must be fine, and some small problems can be avoided, so as to ensure the quality of the product.